sales@momentummotorparts.com    
 
Features
Home
What's New
Lifestyle
Culture
Contact
Products
Lighting
Performance
Electronics
Software
DIY Parts
Accessories


Check Out
View Cart

*all prices in USD$

 
performance  
Braking  
   

We ship overseas on a regular basis - Please enquire for a shipping quote

New MMP 10.1" A1 Wilwood Brake Kit! Now Shipping!

Due to numerous enquiries on a 10.1" A1 Wilwood kit and the hard to find Scirocco 10.1" caliper/carrier assemblies. We have finally found a matching caliper that will work with your OEM braking system. The piston sizing of the caliper is matched to use a 22mm master cylinder (Scirocco 16v)

The kit also uses a 4 piston radial mount caliper which is much lighter than your OEM caliper.

Weight comparison as follows:

Stock OEM 9.4" caliper/carrier/pads 8.5 LBS per side

MMP Wilwood Assembly caliper/pads/adapter 3.7LBS!!! per side

Unsprung weight difference of 4.8 LBS which = 57% in weight reduction per side

No grinding required of your steering knuckle for fitment

Retains your OEM backing plate with slight modification (.25" x 1.5" trim)

Another advantage of the 10.1" kit is most 14" wheels will fit pending wheel style

*Kits are currently being sold minus front 10.1" rotors but we can supply an OEM replacement rotor for an additional cost please inquire

Kit includes:

  • 2 Wilwood 4 piston Radial Mount Calipers using the stress flow forging process along with updated stainless steel pistons caliper info here > powerlite
  • Wilwood BP-10 street or BP-20 fast road/track brake pads (please specify when ordering) pad info here > padinfo
  • MMP custom stainless steel D.O.T. certified brake lines with correct fittings
  • MMP custom CNC brake adapters with all hardware and LocTite
  • Kit comes with full instructions

*minimum wheel fitment is 14", however is also dependent upon wheel style

 

Wilwood Billet Radial Mount Caliper

Updated thick wall stainless pistons preventing less flex and a more solid pedal feel

Wheel clearance info

Golf 1/Rabbit/Cabriolet/Jetta/Scirocco All $675.00

Qty:

 

MMP 11" A1 Brake Adapter Kit A Momentum Original since 1998!

Allows you to mate Corrado G60 caliper/carriers and 11" Corrado G60 rotors to your Mk1!

As previously featured in European Car Magazine

*Some Audi dual piston caliper/carrier assemblies will also work with these adapters

 also the adapter kit will fit certain Fox models

Recommend upgrading to 22mm master cylinder from Scirocco 16v



$105.00 for complete kit (both driver and passenger side)

Qty:

*Please note: we have heard during some installs that you need to grind our adapters to make them fit. This is NOT the case! As per step 13 in the instructions you may have to file some of the factory casting ridge residue on the steering knuckle. This will vary from steering knuckle to steering knuckle and may not be required at all on some knuckles.

Kit includes:

  • MMP 11" A1 brackets are CNC laser cut and finished off on a CNC machine to ensure 100% accuracy                                                 
  • Adapters are CAD plated not powder coated, this ensures more accuracy due to powder coating being a thicker coating
  • Includes all mounting hardware and is supplied with LocTite

  • Each adapter is marked "D" and "P" for driver side and passenger side placement
  • Kit comes with detailed full color instructions

 


MMP Wilwood 4 Piston 11" Brake Kits selling since 1998!

Our kits now use the newest Wilwood DynaPro Lug Mount Forged Caliper! see details below

Due to the tolerance differences in wheel bearing/hub assemblies we have redesigned the adapter to allow for adjustment of the offset and supply a shim kit for centering the rotor

Weight comparison as follows:

Stock OEM 10.1" caliper/carrier 8.8 LBS per side

MMP Wilwood Assembly caliper/adapter 3.8LBS!!! per side

Unsprung weight difference of 5 LBS which = 57% in weight reduction per side

Fits A1/A2/A3 (A2's may require different steering knuckles)

We no longer offer a complete kit with rotors. We can supply rotors for the kit if needed, please inquire for pricing.

Rotor part #'s are as follows:

280mm 5x100- 1H0615301

280mm 4x100- 535615301


Kit includes:

  • 2 Wilwood DynaPro Lug Mount Forged Calipers using the stress flow forging process along with updated stainless steel pistons and bridgebolt kit caliper info here > dynapro
  • Wilwood BP-10 street or BP-20 fast road/track brake pads (please specify when ordering) pad info here > padinfo
  • MMP custom stainless steel D.O.T. certified brake lines with correct fittings
  • MMP custom CNC brake adapters with all hardware and LocTite
  • Kit comes with full instructions

*minimum wheel fitment is 15", however is also dependent upon wheel style

Wilwood DynaPro Lug Mount Forged Billet Caliper


Updated thick wall stainless pistons preventing less flex and a more solid pedal feel


 

Golf 1/Rabbit/Cabriolet/Jetta/Scirocco All $675.00
Qty:


Golf 2 $675.00*
please note you will require steering knuckles off of a golf 3 2.0/Corrado g60/passat 16v

Qty:


Golf 3 2.0L/Cabriolet >94/Corrado G60/Passat 16V $675.00

Qty:


Golf 3 VR6/Corrado VR6/Passat VR6 B3/B4 $675.00

Qty:

Wilwood Dynalite/DynaPro Caliper Bridgebolt kits!















  • Fits all Dynalite/DynaPro calipers using a .81" rotor
  • If you are adding this to an existing Dynalite caliper with the cottor pin, you will have to drill the hole out to " and purchase the bridgebolt style Dynalite pad or modify your existing backing plate on the cotter pin style pad *please enquire for further details
  • Direct fit for DynaPro caliper, no drilling required
  • Sold as a pair

$29 pair
Qty:

PROMO SPECIAL:

Order both MMP stainless lines/MMP Wilwood adapters as a combo and get FREE SHIPPING

(within continental North America)

MMP Custom Stainless Steel Brake Lines for the Wilwood Calipers

 

  • DOT certified
  • Comes with proper fitting for Wilwood caliper to the line
  • Sold as a pair *please call if you require a single one!


$89 pair

Qty:



MMP Custom Brake Adapters for the Wilwood Dynalite/DynaPro Caliper


  • CNC cut to ensure 100% accuracy
  • Made of 6061 aluminum
  • Anodized black finish
  • Comes with the mounting hardware from adapter to caliper
  • Sold in pairs


Golf 1 Rabbit/Jetta/Scirocco All $189.00 pair

Qty:


Golf 2 $189.00* please note you will require steering knuckles off of a golf 3 2.0/Corrado g60/passat 16v

Qty:


Golf 3 2.0L/VR6-Cabriolet 2.0L >94 -Corrado G60/VR6-Passat 16V/VR6 B3/B4 $189.00

Qty:



Polymatrix Q Compound Pads for Dynalite Calipers

-For dynalite caliper using a .81" rotor
-Sold in sets of 2 (2 sets will do 2 calipers)










For Dynalite Caliper using Bridgebolts $79.00 pair

Qty:



For Dynalite Caliper using Cotter Pins (comes with 2 new cotter pins) $69.00 pair

Qty:




View Order | Check Out | Contact
©2005 Momentum Motor Parts | Legal Notices & Policies