New MMP 10.1" A1 Wilwood Brake Kit! Now Shipping!
Due to numerous enquiries on a 10.1" A1 Wilwood kit and the hard to find Scirocco 10.1" caliper/carrier assemblies. We have finally found a matching caliper that will work with your OEM braking system. The piston sizing of the caliper is matched to use a 22mm master cylinder (Scirocco 16v)
The kit also uses a 4 piston radial mount caliper which is much lighter than your OEM caliper.
Weight comparison as follows:
Stock OEM 9.4" caliper/carrier/pads 8.5 LBS per side
MMP Wilwood Assembly caliper/pads/adapter 3.7LBS!!! per side
Unsprung weight difference of 4.8 LBS which = 57% in weight reduction per side
No grinding required of your steering knuckle for fitment
Retains your OEM backing plate with slight modification (.25" x 1.5" trim)
Another advantage of the 10.1" kit is most 14" wheels will fit pending wheel style
*Kits are currently being sold minus front 10.1" rotors but we can supply an OEM replacement rotor for an additional cost please inquire
- 2 Wilwood 4 piston Radial Mount Calipers using the stress flow forging process along with updated stainless steel pistons caliper info here > powerlite
- Wilwood BP-10 street or BP-20 fast road/track brake pads (please specify when ordering) pad info here > padinfo
- MMP custom stainless steel D.O.T. certified brake lines with correct fittings
- MMP custom CNC brake adapters with all hardware and LocTite
- Kit comes with full instructions
*minimum wheel fitment is 14", however is also dependent upon wheel style
Wilwood Billet Radial Mount Caliper
Updated thick wall stainless pistons preventing less flex and a more solid pedal feel
Wheel clearance info
Golf 1/Rabbit/Cabriolet/Jetta/Scirocco All $675.00
MMP 11" A1 Brake Adapter Kit A Momentum Original since 1998!
Allows you to mate Corrado G60 caliper/carriers and 11" Corrado G60 rotors to your Mk1!
As previously featured in European Car Magazine
*Some Audi dual piston caliper/carrier assemblies will also work with these adapters
also the adapter kit will fit certain Fox models
Recommend upgrading to 22mm master cylinder from Scirocco 16v
$105.00 for complete kit (both driver and passenger side)
*Please note: we have heard during some installs that you need to grind our adapters to make them fit. This is NOT the case! As per step 13 in the instructions you may have to file some of the factory casting ridge residue on the steering knuckle. This will vary from steering knuckle to steering knuckle and may not be required at all on some knuckles.
- MMP 11" A1 brackets are CNC laser cut and finished off on a CNC machine to ensure 100% accuracy
- Adapters are CAD plated not powder coated, this ensures more accuracy due to powder coating being a thicker coating
- Includes all mounting hardware and is supplied with LocTite
- Each adapter is marked "D" and "P" for driver side and passenger side placement
- Kit comes with detailed instructions