|
New MMP 10.1" A3 Wilwood Brake Kit!
Due to numerous enquiries on a 10.1" A3 Wilwood kit (must have the MK3 2.0L steering knuckles),we have finally found a matching caliper that will work with your OEM braking system. The piston sizing of the caliper is matched to use a 22mm master cylinder (16v GTI/Jetta)
The kit also uses a 4 piston radial mount caliper which is much lighter than your OEM caliper.
Weight comparison as follows:
Stock OEM 9.4" caliper/carrier/pads 8.5 LBS per side
MMP Wilwood Assembly caliper/pads/adapter 3.7LBS!!! per side
Unsprung weight difference of 4.8 LBS which = 57% in weight reduction per side
Some clearancing required of your steering knuckle for fitment
Retains your OEM backing plate with slight modification (.25" x 1.5" trim)
Another advantage of the 10.1" kit is most 14" wheels will fit pending wheel style
*Kits are currently being sold minus front 10.1" rotors but we can supply an OEM replacement rotor for an additional cost please inquire
Kit includes:
- 2 Wilwood 4 piston Radial Mount Calipers using the stress flow forging process along with updated stainless steel pistons caliper info here > powerlite
- Wilwood BP-10 street or BP-20 fast road/track brake pads (please specify when ordering) pad info here > padinfo
- MMP custom stainless steel D.O.T. certified brake lines with correct fittings
- MMP custom CNC brake adapters with all hardware and LocTite
- Kit comes with full instructions
*minimum wheel fitment is 14", however is also dependent upon wheel style
Wilwood Billet Radial Mount Caliper
Updated thick wall stainless pistons preventing less flex and a more solid pedal feel
Wheel clearance info
Golf /Jetta 3 2.0L only 4x100 bolt pattern Now Available! May 7/10
|
Polymatrix Q Compound Pads for Dynalite Calipers
