sales@momentummotorparts.com    
 
Features
Home
What's New
Lifestyle
Culture
Contact
Products
Lighting
Performance
Electronics
Software
DIY Parts
Accessories


Check Out
View Cart
 
Software  
all prices are in CDN on this page
Software  
   

Neuspeed®/OptiCan® Power Flash Now Available at MMP!

*Fully OEM Compatable

Please note: We are now fully mobile and can offer mobile flashing at no extra charges* (*some restrictions may apply, please enquire with your location)

Momentum Motor Parts is proud to announce we are now an authorized Neuspeed®/OptiCan® Power Flash dealer. We have now flashed our 2007 GTI 2.0L FSI with great results!

The rev limiter has been increased to 7000rpm , top speed limiter has been raised to a point where the car will never hit and the boost spike is set to about 1.3 bar. You can read about it in the Nov/05 issue of EuroTuner magazine right here. (Adobe PDF reader required)


The process:

-First we scan your car for any fault codes using the Ross-Tech VagCom Hex tool using the latest software

-We then plug in our Neuspeed ®/OptiCan® interface tool into your OBD2 port

-We then launch the Neuspeed ®/OptiCan® software which will then initialize and go into an authentication process

-We then select your make/ model/engine and ecu type and "Get ID" this will pull up the specifics to your cars ecu

-We then "Read" your stock file and save it on our harddrive

-The stock file is then uploaded to the Neuspeed®/OptiCan® server which then confirms that all the data is correct

-We then receive the address to download the new "TUN' file which is specific to your vehicle

-We then "Write" this file to your ecu

-Once this is complete we then reboot your ecu and then do the throttle body adaptation

-We then start the car and then again scan the car with the Ross-Tech Vagcom tool to ensure there are no fault codes

-The process is now complete and the test drive is the final step



Upon completion we will give you a copy of your files on a custom CD which contains all your data to your vehicle. With these files we will be able to flash back and forth from your stock to the TUN file an infinite amount of times.



The pricing below includes the above initial install along with infinite amount of flashing back and forth. Also includes unlimited VagCom scans for engine codes or any changes you need to do using the tool to your flashed vehicle ie. Electronic steering dampener changes.





Audi
2.0L FSI
1.8T DBW
2.7T Bi-Turbo
2.8L 30V V6
3.0L 30V V6
3.2L V6
4.2L 40V V8
$795.00 CDN installed
$595.00 CDN installed
$675.00 CDN installed
$475.00 CDN installed
$475.00 CDN installed
$475.00 CDN installed
$675.00 CDN installed
VW
2.0L FSI
1.8T DBW
2.0L 8V DBW
2.5L 5CYL
2.8L VR6 12V DBW
2.8L VR6 24V
2.8L 30V V6
3.0L 30V V6
3.2L V6
4.2L 40V V8
$795.00 CDN installed
$595.00 CDN installed
$475.00 CDN installed
$475.00 CDN installed
$475.00 CDN installed
$475.00 CDN installed
$475.00 CDN installed
$475.00 CDN installed
$475.00 CDN installed
$675.00 CDN installed


The install time is approx. 1-2 hours depending on engine type. This application list will be updated as more engine codes become available. All prices above do not include applicable taxes.

Within the BC lower mainland, we are able to travel to you locally for the install. Please enquire with your location.


View Order | Check Out | Contact
©2005 Momentum Motor Parts | Legal Notices & Policies